联系我们

如何支持您?请联系我们!

EKATO 中国
+86 21 6495 2966-0

查找您当地的联系人:

All contacts
EKATO

Single-Acting Mechanical Seals

Dry-Running and Lubricated – For Low Pressure Applications

Single-acting mechanical seals are designed with two seal rings with one interface and without any seal liquid chamber. This type of mechanical seal therefore has to be operated either under dry conditions or must be lubricated and cooled by the liquid product.

The key design feature of single-acting mechanical seals is that they have only two seal rings. This means they have only one interface and no seal liquid chamber. Therefore this type of mechanical seal has to be operated either under dry conditions or it must be lubricated and cooled by the liquid product.

A key characteristic of single-acting mechanical seals is that they can leak into the surroundings of the vessel. This means the vessel is not technically tight, in contrast to double and triple-acting mechanical seals. Therefore, this seal design is suitable for sealing non critical substances and for low pressure applications.

Function and application

  • Single acting, dry-running mechanical seal for low pressure applications
  • Ready-to-install cartridge unit
  • Deliverable with short heat trap at extremely high temperatures
  • Deliverable with Collector tray prevents abrasion material from contaminating the vessel space

Advantages

  • Leak tightness: minimal leakage from the vessel side
  • Suitable for sealing non-critical substances
  • Plug + seal: no adjustment of the spring pre-tension after installation
  • Easy to monitor and install
  • Dry operation eliminates the need for additional installation or supply of seal liquid
  • Redundant monitoring by temperature sensor with transmitter
  • Visual wear indicator

Working limits

  • Operating pressure: vacuum...4 bar (abs.)
  • Vessel temperature: -10...+230°C
  • Shaft size: 40...220 mm

The EKATO ESD 32 is most suitable for

  • Speciality chemicals
  • Formulated consumer products
  • Biofuels and bio refineries
  • Storage tanks

Function and application

  • Single-acting product lubricated mechanical seal for sealing abrasive suspensions
  • Mechanical seal ESD142 is used as a flooded seal - horizontal or vertical installation

Advantages

  • No addition seal liquid supply systems required
  • Extended life time, with abrasive products

Advantages

  • No addition seal liquid supply systems required
  • Extended life time, with abrasive products

Working limits

  • Operating pressure: vacuum...3 bar (abs.)
  • Vessel temperature: -20...+100°C
  • Shaft size: 20...80 mm
  • Sliding speed: 0...5 m/s

The EKATO ESD 142 is most suitable for

  • Biofuels und bio refineries
  • Storage tanks
  • Function and application
  • Single-acting product lubricated mechanical seal
  • Sealing of abrasive suspensions
  • Used in flooded side entry installations
  • Mechanical seal most commonly used in FGD agitators worldwide

Advantages

  • Lubricated and cooled by the product - no additional hydraulic installations required
  • Special plastics provide greater protection against caking and corrosion
  • Shut off device for replacement of mechanical seals even during operation without emptying the vessel

Working limits

  • Operating pressure: vacuum...7 bar (abs.)
  • Vessel temperature: -20...+80°C
  • Shaft size: 40...120 mm
  • Sliding speed: 0...5 m/s

The EKATO ESD 42 is most suitable for

  • Flue gas desulfurization

Related Topics 相关主题

You may also be interested in these topics 你也可能对这些主题感兴趣

04_Hydraulikkomponenten-aspect-ratio-5-4

Mechanical Seal and Supply System

自1950年以来,机械密封开始被用于搅拌器技术。EKATO是在搅拌器中使用机械密封的先驱之一,至今仍在使用。

了解更多
HWL_N_1400x800-aspect-ratio-5-4

Agitators

在超过85年的时间里,EKATO一直代表着搅拌器领域的高水平的开发和制造技术。无论搅拌机的大小和复杂性,客户的利益和可靠性始终是第一位的。…

了解更多
Wendel_g-scaled-aspect-ratio-5-4

Impellers

In recent years, the requirements for mixing systems in industrial applications have increased steadily. The design of the impellers, the selection of…

了解更多
04_Hydraulikkomponenten-1-aspect-ratio-5-4

Hydraulic Components for Mechanical Seals

In mixing technology, a reliable sealing of the mixing vessel can only be ensured by means of a complete mechanical seal system.

了解更多